What to do if my Amica AWI714S Washer is not filling with water?
First, ensure the water valve is turned on. Then, check the program settings and water pressure. Reconnect the water supply hose, ensuring the appliance door is closed. Also, verify that the water intake is not bent or blocked.
What to do if my Amica AWI714S is vibrating?
Ensure that the transport safety devices have been removed from the appliance. Level the appliance and secure the legs by tightening the nuts.
What does E03 mean on my Amica AWI714S?
E03 error code indicates improper water outflow. Ensure that the drain hose is not clogged, and check the pump and water filter.
What does E01 mean on my Amica Washer?
Error code E01 indicates that the door is ajar. Check that the door is locked and that laundry is not jammed in the door.
What to do if my Amica AWI714S load hasn't spun?
Replace the load evenly in the drum, and clean the pump filter.
Why does my Amica Washer have an unpleasant smell?
Activate the Autoclean cycle without a load. See the washing programme table for instructions.
Why is my Amica AWI714S washing not properly rinsed?
Use the correct amount of cleaning agent, depending on how dirty the washing is and the hardness of the water, referring to the instructions on the cleaning agent's packaging. Also, clean the pump filter.
Why is my Amica AWI714S Washer simultaneously intaking and draining water?
Check that the end of the outlet hose is higher than the level of the water in the appliance. The hose should be at a height of 0.6m to 1m.
What causes water outflow problems in my Amica Washer?
Check the pump filter and the outlet lead. Also, verify the height of the outlet hose, which should be 0.6m to 1m from the bottom of the washing machine.
Why is there foam coming from the detergent drawer of my Amica AWI714S?
Reduce the amount of detergent used. Check the water hardness, the amount of detergent used, and the type of detergent used in the drum.
Safety for detergents, solvents, loading, and control panel.
Safety for transport, data plate location, and burn risks.
Stability checks and proper appliance disposal procedures.
Steps to remove transit bolts and level the machine.
Guidance on water, drain hose, and electrical connections.
Guide to diagnosing and resolving frequent operational issues.
Explanation of error codes displayed on the machine and their solutions.
Safety for detergents, solvents, loading, and control panel.
Safety for transport, data plate location, and burn risks.
Stability checks and proper appliance disposal procedures.
Steps to remove transit bolts and level the machine.
Guidance on water, drain hose, and electrical connections.
Guide to diagnosing and resolving frequent operational issues.
Explanation of error codes displayed on the machine and their solutions.
General| Appliance placement | Freestanding |
|---|---|
| Capacity | 7 kg |
| Energy Efficiency Class | D |
| Spin Speed | 1400 RPM |
| Dimensions (H x W x D) | 85 x 60 x 56.5 cm |
| Built-in display | Yes |
| Door hinge | Left |
| Drum material | Stainless steel |
| Spin-drying class | B |
| Washing class | A |
| Number of washing programs | 15 |
| Delayed start timer | Yes |
| Water consumption washing per cycle | 45 L |
| Width | 600 mm |
| Height | 850 mm |
To Next Page
