What to do if my Amica WA 14681 W is not starting up?
First, ensure that the door is closed tightly. Then, check if the power plug is properly inserted. Also, verify that the water supply tap is open and that you have pressed the 'Start/Pause' and 'Power' buttons.
Why can't I open the door of my Amica Washer?
If you cannot open the washer door, the machine’s safety protection design may be active. Disconnect the power to resolve this.
How to solve drain problem while washing in Amica WA 14681 W Washer?
A drain problem during washing, where drain time exceeds 3 minutes, may be caused by a blocked or twisted outlet hose, or a blocked drain pump. Wash and straighten the outlet hose. Also, wash the drain pump filter.
Why is my Amica WA 14681 W leaking water?
Water leakage may occur if the connection between the inlet pipe or outlet hose and the tap or washing machine is not tight, or if the drain pipe in the room is blocked. Check and fasten the water pipes. Clean up the outlet hose and, if necessary, ask a specialized person to repair it.
How to fix water injecting problem in my Amica WA 14681 W Washer?
If your washer is taking too long to inject water, the tap may not be fully opened, or the water flow may be too slow. Also, the inlet valve filter could be blocked, or the inlet pipe might be twisted. Open the tap fully or wait until the water supply returns to normal. Check the inlet valve filter and straighten the water pipe. Check the other taps in the room to see if water is supplied.
What to do if my Amica WA 14681 W Washer is making abnormal noise and vibrating a lot?
Check if the fixing bolts have been removed from the back of the machine. Ensure the cabinet is installed on a solid and level floor. Inspect the inside of the washer drum for any barrettes or metal articles. Also, check if the legs of the washing machine are adjusted to be level.
What to do if water is overflowing from the bottom of my Amica Washer?
If water is overflowing from the bottom of the machine, it could be due to the inlet pipe not being connected firmly or a leak in the outlet hose. Ensure the inlet pipe is securely fixed. If the outlet hose is leaking, replace it.
What to do if there are detergent residues in the dispenser of my Amica WA 14681 W Washer?
Detergent residues in the dispenser box may be caused by washing powder that has become dampened and agglomerated. Clean and wipe the box. Consider using liquid detergents or detergents specifically designed for drum washing machines.
Why my Amica Washer is not washing clothes well?
If your washing results are not satisfactory, it could be because the clothes are excessively dirty or because you're using an insufficient amount of detergent. Select a proper wash cycle for heavily soiled clothes. Add the correct amount of detergent, following the instructions on the detergent package.
General| Type | freestanding |
|---|---|
| Loading type | Front load |
| Maximum spin speed | 1400 RPM |
| Washing capacity | 8 kg |
| Energy efficiency class | A+++ |
| Width | 60 cm |
| Depth | 55 cm |
| Height | 85 cm |
| Capacity | 8 kg |
| Spin speed | 1400 RPM |
| Energy class | A+++ |
| Dimensions (H x W x D) | 85 x 60 x 55 cm |
Key safety and operational guidelines for domestic use.
Proper detergent use and safe loading practices.
Warnings about hot surfaces and checking stability.
Prior to first use, ensure levelling and bolt removal.
Guidelines for children and safe appliance disposal.
Steps to remove locking bolts and brackets.
Ensuring a stable, level installation on a suitable surface.
Electrical connection safety and requirements.
Details on selecting programmes, Prewash, Extra Rinse, and No Spin.
How to start, pause, and resume wash cycles.
Steps to load, select programme, functions, and start.
Common issues indicated by lights and their solutions.
Solutions for common problems like startup failure or heating faults.
To Next Page
