How to solve water outflow problems in Amica WA 14662 W Washer?
To solve water outflow problems in your Amica Washer, check the pump filter and the outlet lead. Also, verify the height of the outlet hose, ensuring it's between 0.6m and 1m from the bottom of the washing machine.
Why my Amica WA 14662 W Washer does not fill with water?
If your Amica Washer isn't filling with water, make sure the water valve is on, check the program setting, and verify the water pressure. Reconnect the water supply hose, ensure the appliance door is closed, and check that the water intake isn't bent or blocked.
Why is my Amica WA 14662 W vibrating?
If your Amica Washer is vibrating, ensure that the transport safety devices have been removed. Level the appliance and secure the legs by tightening the nuts.
What to do if the load in my Amica WA 14662 W Washer has not been spun?
If the load in your Amica Washer hasn't been spun, redistribute the load evenly in the drum and clean the pump filter.
Why is washing not properly rinsed in my Amica WA 14662 W Washer?
If your washing isn't being properly rinsed in your Amica Washer, use the correct amount of cleaning agent based on how dirty the washing is and the water hardness, following the instructions on the cleaning agent’s packaging. Also, clean the pump filter.
How to fix improper water outflow in Amica Washer?
To fix improper water outflow in your Amica Washer, make sure the drain hose is not clogged and check the pump and water filter.
Why is the operation of my Amica WA 14662 W interrupted?
If the operation of your Amica Washer is interrupted before the program finishes, check the power supply, water supply, and water outlet.
Why is there foam from the detergent drawer of Amica Washer?
If you see foam coming from the detergent drawer of your Amica Washer, reduce the amount of detergent you're using. Also, check the water hardness, the amount of detergent used, and the type of detergent used in the drum.
What to do if there is no water in the drum of Amica Washer?
If there's no water in the drum of your Amica Washer, turn on the tap to supply water.
How to remove unpleasant smell in the drum of Amica WA 14662 W Washer?
To remove an unpleasant smell in the drum of your Amica Washer, run a hot wash cycle with detergent but without any load.
General| Type | Freestanding |
|---|---|
| Appliance placement | Freestanding |
| Product colour | White |
| Built-in display | Yes |
| Control type | Buttons, Rotary |
| Door hinge | Left |
| Drum material | Stainless steel |
| Rated capacity | 6 kg |
| Maximum spin speed | 1400 RPM |
| Spin-drying class | B |
| Washing class | A |
| Number of washing programs | 15 |
| Delayed start timer | Yes |
| Delay start | Up to 24 hours |
| Energy efficiency class | A+++ |
| Annual energy consumption washing | 153 kWh |
| Annual water consumption washing | 9900 L |
| Water consumption | 45 liters per cycle |
To Next Page
