Why is there water left in the fabric softener container of Amica WA 14662 W Washer?
If there's water left in the fabric softener container of your Amica Washer, firmly press the button in the middle of the container.
Why is Amica WA 14662 W simultaneously intaking and draining water?
If your Amica Washer is simultaneously intaking and draining water, check that the end of the outlet hose is higher than the water level in the appliance. The hose should be at a height of 0.6m to 1m.
General| Type | Freestanding |
|---|---|
| Appliance placement | Freestanding |
| Product colour | White |
| Built-in display | Yes |
| Control type | Buttons, Rotary |
| Door hinge | Left |
| Drum material | Stainless steel |
| Rated capacity | 6 kg |
| Maximum spin speed | 1400 RPM |
| Spin-drying class | B |
| Washing class | A |
| Number of washing programs | 15 |
| Delayed start timer | Yes |
| Delay start | Up to 24 hours |
| Energy efficiency class | A+++ |
| Annual energy consumption washing | 153 kWh |
| Annual water consumption washing | 9900 L |
| Water consumption | 45 liters per cycle |
To Next Page
