Amica EB 944 100 E - Page 75

15
OPERATION
The function AUTO is now on; the oven will
startoperatingfromthepointwhenthedi󰀨er-
ence between the set operation end time and
the operation duration time occurs (e.g. the
operation time is set to 1 hour, the operation
end time is set to 14.00, so the oven will start
working automatically at 13.00).
When the oven reaches the operation end
timeitwillswitcho󰀨automatically,thealarm
will be activated and the function AUTO will
startashingagain.
Set the oven function knob and the tem-
peratureregulatorknobtotheswitched–o󰀨
position.
Press sensor 1, 2 or 3inordertoswitcho󰀨
the alarm; the function AUTO will go out and
the display will show the current time.
Cancel settings
Timer and automatic function settings may
be cancelled at any time.
Cancel automatic function settings:
press sensors 2 and 3 simultaneously,
Cancel timer settings:
press sensor 1 to select timer settings,
press sensors 2 and 3 again,
Change the timer beeps
The tone of the timer beeps may be
changed as follows:
press sensors 2 and 3 simultaneously,
select “tone” function with the 1 sensor,
the display panel will start to blink:
●withthe2sensor press the appropriate
sensors from 1 to 3 to select the option you
wish.
eration end time and the operation duration
time occurs (e.g. the operation time is set to
1 hour, the operation end time is set to 14.00,
so the oven will start working automatically
at 13.00).
12 35
MENU
88 81
MENU