Amica EBX 944 700 E - Page 19

19
OPERATION
You can check the set times much the same
as temperature. Touch briey to display
the minute minder setting. Touch again to
display the Duration. Touch again to display
the End Time. Touch again to displaying the
current time.
To adjust the set time, touch and hold and
the currently set time will be displayed. Use
and to adjust it as needed. Touch
to conrm the setting. The new value is not
set until conrmed.
To change the heating function during oven
operation simply select a new function The
newly selected function indicator starts ash-
ing while the currently running function does
not change. Touch to conrm the selection
of a new function. The new function indica-
tor stops ashing and remains on while the
previous function indicator goes o󰀨. If you do
not conrm the new selection, the previous
function will continue.
When you change a function, the set tem-
perature remains the same.
End a heating function
Touch and hold to end a heating func-
tion. By default the oven functions operate
indenitely, but you can set the oven to turn o󰀨
using a timed operation function or delayed
timed operation function. The only exception
is the pyrolytic cleaning function, which can-
not be modied.
Duration (automatic o󰀨)
In this mode the oven will turn o󰀨 after a
set duration has elapsed. You can set the
duration from 1 minute to 10 hours. To set
timed operation for any oven function, touch
and hold the sensor, and the minute
minder symbol will ash on the display. Touch
again, the symbol will appear on the
display. Now touch to set the Duration and
touch to conrm.
Touch / to adjust Duration as needed.
Touch to conrm the adjusted setting.
To clear the Duration touch until you reach
0:00 and touch to conrm.
Turning o󰀨 the oven interrupts the active oven
function. When the set Duration has elapsed,
you will hear beeping. Touch any sensor ex-
cept to mute the beeping. The beeping
stops, the function settings and temperature
are cleared and lighting will turn on for 30 s.
The symbol will go out. The appliance
will turn o󰀨 after another 60 seconds.
Note: When you use the sensor to mute
the beeping, the appliance will allow you to
adjust the delayed start time.