What to do if sensor fields on Amica KMI 752 610 E Hob do not respond?
If the sensor fields on your Amica Hob aren't responding, consider these possibilities: * The appliance might not be turned on, so ensure it is. * You may be touching the sensor field too briefly; touch it for a longer duration. * You might be touching multiple sensors simultaneously; only touch one at a time (except when switching off a cooking zone).
Why does my Amica KMI 752 610 E Hob switch off by itself?
Your Amica Hob might be switching off automatically due to these reasons: * If no sensor field is touched for 10 seconds after activating the appliance, it will switch off. Turn on the appliance and set the heat setting without delay. * The sensor fields could be covered or dirty. Make sure to uncover or clean the sensor fields.
What to do if Amica KMI 752 610 E doesn't respond and beeps?
If your Amica Hob is beeping and not responding, it could be due to improper use, such as touching the wrong sensor fields or touching them too briefly. Try reconnecting the hob. Also, check if the sensor fields are covered or dirty, and if so, uncover or clean them.
Why a single cooking zone on my Amica Hob switches off?
If a single cooking zone on your Amica Hob switches off and the residual heat indicator "H" is displayed, it could be due to limited cook time. Try switching the cooking zone on again. Another possibility is that the sensor fields are covered or dirty; uncover or clean them.
Why is residual heat indicator off on my Amica KMI 752 610 E Hob when cooking zones are hot?
The residual heat indicator might be off on your Amica Hob, even when the cooking zones are hot, because of a power outage or because the appliance has been disconnected. The indicator will be shown again the next time the appliance is turned on and off.
General| Hob type | Induction |
|---|---|
| Number of cooking zones | 4 |
| Control type | Touch |
| Power Levels | 9 |
| Depth | 52 cm |
| Colour | Black |
| Material | Glass ceramic |
| Width | 75 cm |
| Safety Features | Child lock |
| Total power | 7400 W |
To Next Page
