To Next PageTo Next PageWhat to do if Amica KMI754000C does not work and the cooking zones will not operate?
If your Amica hob isn't working and the cooking zones won't operate, it may be due to faulty electronics. Try resetting the appliance by unplugging it for a few minutes, or disconnecting the fuse.
Why does my Amica KMI754000C appliance not work?
If your Amica hob isn't working, the most common cause is a lack of power. Check the fuse and replace it if it has blown.
What to do if Amica KMI754000C Hob sensor fields do not respond when touched?
If the sensor fields on your Amica Hob aren't responding, there could be a few reasons. First, ensure that the appliance is turned on. If it is, make sure you're touching the sensor field long enough (more than one second). Also, be sure to touch only one sensor at a time, except when switching off a cooking zone.
What to do if my Amica Hob appliance switches itself off?
Your Amica hob might be switching off due to a couple of reasons. If no sensor field is touched for 10 seconds after activating the appliance, it will switch off. To prevent this, switch on the appliance and set a heat setting without delay. Another reason could be that the sensor fields are covered or dirty; uncover or clean them.
What to do if my Amica KMI754000C does not respond and emits an extended beep?
If your Amica hob isn't responding and is emitting an extended beep, it could be due to improper use, such as touching the wrong sensor fields or touching them too briefly. Try reconnecting the hob. Another possibility is that the sensor fields are covered or dirty, so uncover or clean them.
Why does a single cooking zone switch off on my Amica KMI754000C?
A single cooking zone on your Amica hob might switch off due to limited cook time. In this case, switch on the cooking zone again. Another reason could be that the sensor fields are covered or dirty, so ensure they are uncovered and clean. Also, it can happen if electronic components overheated.
Why is the residual heat indicator extinguished on my Amica KMI754000C even though the cooking zones are hot?
If the residual heat indicator on your Amica hob is extinguished even though the cooking zones are still hot, it's likely due to a power outage or the appliance being disconnected. The residual heat indicator will be shown again the next time the appliance is turned on and off again.
General| Type | Induction Hob |
|---|---|
| Number of Cooking Zones | 4 |
| Control Type | Touch |
| Power Levels | 9 |
| Color | Black |
| Total power | 7.4 kW |
| Material | Ceramic Glass |
| Residual heat indicator | Yes |
| Timer | Yes |
| Weight | 11 kg |
| Safety Features | Child Lock, Automatic Switch Off |
| Dimensions (W x D) | 59 x 52 cm |
| Width | 590 mm |
Procedure for preparing the kitchen worktop for appliance installation.
Steps for placing the hob into the prepared worktop opening.
Diagram illustrating the electrical connections required for the appliance.
Daily cleaning tasks to maintain the appliance's appearance and function.
Methods for effectively removing stubborn stains from the cooking surface.
Details regarding the product warranty terms and conditions.
