26 Amico Beds Corporation
Foot Siderail Replacement
WARNING: Replacement of Siderail MUST be completed per the instructions below and only using Amico
approved parts. Failure to comply may result in significantly-reduced effectiveness of the safety features of the
system.
Step
No.
Procedure Illustrations
1 Locate Foot Siderail that requires replacement.
Make sure that replacement Foot Siderail
corresponds to the correct side of the bed.
2 Locate the bolts holding the Foot Siderail to the
Upper frame. Using a 1/2" (13 mm)
wrench/socket, remove the bolts.
3 Raise the Knee Section and remove the Foot
Siderail by unhooking it from the Upper Frame.
4 To install the new Foot Siderail, perform the
above steps in reverse. With the new Foot
Siderail plugged in, check that the buttons are
working properly.
To Next Page
Loading...
