Choice of Display Unit (Metric system/ English system)
Press UP or DOWN to choose a display unit. The unit could be MPH and Km/h. The range unit is changing accordingly with the speed unit.
Wheel Size Setting
Press MODE for confirmation and enter into the wheel size setting. Press UP or DOWN to choose a corresponding wheel diameter to ensure the accurate display of speed
and distance. The interface is as follows:
Press MODE to confirm the wheel size and enter into the LCD backlight brightness setting. The default value of the wheel size is 26 inch.
Backlight Brightness Setting
Press UP or DOWN to modify the backlight brightness. You can choose from level 1 to level 3. Level 1 is the minimum brightness. Level 3 is the maximum brightness. The
default value of the backlight brightness in J—LCD display is level 1.
To Next Page
Loading...
