11. Other information
• Make sure that all reflectors are properly fitted and not covered.
• Do not clean your e-bike with a pressure washer. Water could penetrate into the motor, cause short circuits and damage electrical components. Only
ever use a damp cloth with a neutral detergent to clean your e-bike. Do not use acidic detergents as these could damage the e-bike.
• Do not over-lubricate. If oil gets onto the wheels or the brake pads, it reduces the performance of the brakes and increases braking distances.
• Never oil the tread of the pedals use grease instead. Wash excess oil from the wheels or brake pads with soapy water. Dry the e-bike before using it
again.
• Don’t forget your helmet!
To Next Page
Loading...
