7. Display Operation
On/Off
Press MODE and the display start to work for the controller power supply.
In the Power On State, hold MODE or lay aside for five minutes, to cut off the e-bike power supply. In the Power Off state, the display and the controller don’t use the
battery power supply. So the power consumption is ZERO.
Speed Display (Current Speed/Average Speed/Max Speed)
When the e-bike starts, the display will automatically show the current speed.
Hold UP and the display will show the MAX speed during this ride. Hold UP again and the display will show the AVG speed during this ride. Hold UP again and the display
will turn to the current speed display.
To Next Page
Loading...
Need help?
General
