©Copyright AMKUS Rescue Systems 2020-2021 9 LAI-004 July 20, 2021 Rev01
4.2 CUTTER SPECIFICATIONS
Table 4.2
4.3 SPREADER SPECIFICATIONS
Table 4.3
4.4 TELESCOPING RAM SPECIFICATIONS
5.0 SAFETY CONSIDERATIONS
5.1 PROTECTIVE CLOTHING
5.2 TRAINING
Part#: IC700
MECHANICAL SPECIFICATIONS
Dimensions: Length x Width x Height Inches (mm) 32.9 x 8.7 x 11.6 (856 x 221 x 294)
Weight (excluding battery) lb (kg) 54.3 (24.6)
Weight (ready to use) lb (kg) 56.6 (25.6)
Cutter Opening Inches (mm) 5.8 (147)
Cutter Rating NFPA 1936 A7/B8/C7/D9/E9/F4
Part#: IS281
MECHANICAL SPECIFICATIONS
Dimensions: Length x Width x Height Inches (mm) 35.9 x 11.1 x 11.6 (912 x 282 x 294)
Weight (excluding battery) lb (kg) 53.9 (24.4)
Weight (ready to use) lb (kg) 56.3 (25.5)
Max Spreading Distance Inches (mm) 28.2 (716)
Max Spreader Opening (w/optional ERT tips) Inches (mm) 35.4 (899)
Highest Spreading Force (HSF) lb (kN) 16.430 (73.1)
Lowest Spreading Force (LSF) lb (kN) 11,850 (52.7)
Max Spreading Force lb (kN) 23,850 (106.1)
Highest Pulling Force (HPF) lb (kN) 12,860 (57.2)
Lowest Pulling Force (LPF) lb (kN) 9,200 (40.9)
Part#: ITR500
MECHANICAL SPECIFICATIONS
Dimensions: Length (Retracted) x Width x Height Inches (mm) 21.9 x 11.5 x 10.9 (556 x 292 x 277)
Dimensions: Length (Extended) x Width x Height Inches (mm) 50.5 x 11.5 x 10.9 (1283 x 292 x 277)
Weight (excluding battery) lb (kg) 54.30 (24.63)
Weight (ready to use) lb (kg) 56.55 (25.65)
Stroke: Piston 1 Inches (mm) 15 (381)
Stroke: Piston 2 Inches (mm) 13.55 (344)
Stroke: Overall Inches (mm) 25.55 (649)
Highest Spreading Force (HSF)- Piston 1 lbs (kN) 46,500 (206.8)
Lowest Spreading Force (LSF)- Piston 2 lbs (kN) 21,750 (96.7)
Tool operators bear responsibility for ensuring use of appropriate protective clothing and
equipment. The chosen protective clothing and equipment must provide protection from potential
hazards users may encounter while operating AMKUS rescue tools. Requirements for protective
clothing and equipment are determined by the Authority Having Jurisdiction (AHJ).
AMKUS tools facilitate the extrication of entrapment victims. Only trained emergency services
personnel should attempt victim extrication. All personnel using Amkus rescue tools are assumed
to have completed a training course covering safe extrication of entrapment victims. The training
must be acknowledged as educationally sound by the local Authority Having Jurisdiction (AHJ)
over such training.
To Next Page
Loading...
