• Adjust direction of drive and speed with the drive lever (3); one
hand must remain on the handle (1).
• If both handles (1) are released then the machine will come to
a stand-still after a short over travel time period. If one of the
handles is touched again then the machine will continue to
drive in the previously selected direction of drive and speed.
The machine facilitates over a short over travel
path. This must be taken into consideration when
working with the machine.
It is absolutely necessary to press the emergency
off switch inwards when taking a work break of at
the end of the working period so that any uninten-
tional driving off by the machine is prevented
To Next Page
Loading...
