EasyManua.ls Logo

Ammann AR 65 - Vibration Specifications; Noise and Vibration Data

Ammann AR 65
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. Vibration
Centrifugal force 13/18kN
Vibrating frequency 60/55Hz
Vibr. force per cm of roller width 100 / 138 N/cm
Amplitude 0,3 / 0,5 mm
7. Filling quantities
Water
60 l
Fuel
5 l
8. Option
Option electric starter
9. Noise and Vibration data
The following listed noise and vibration data according to the EC machine directive in the version (91/368/EEC) was determined
at the rated speed of the drive motor with vibration with the machine placed on a resilient base.
Values can deviate in normal use depending on the conditions prevailing at the place of use.
9.1 Noise data
The noise emission specified in appaendix 1, subclause 1.7.4.f of the EC machine directive for:
the sound pressure level at the operator
place is L
PA
92 dB(A)
the sound power level L
WA
108 dB(A)
The noise levels were measured according to ISO 3744 for thr sound power level (L
WA
) and ISO 6081 for the sound pressure level
(L
PA
) at the operator workplace.
9.2 Vibration data
Hand-arm vibration values according to appendix 1, sub-clause 3.6.3.a of the EC machine directive:
The weighted effective value af acceleration, determined according to ISO 8662, part 1, is about 5,2 m/s².
*Since the permissible noise rating level of 89 dB(A) can be exceeded with this machine, the operator must wear suitable
hearing protection.
24
2. Technical data

Table of Contents

Related product manuals