Maintenance schedule
Intervals
daily 20 h 50 h 100 h 250 h 500 h 1000 h
as
required
Works
Clean machine
l
Check engine oil level
1)
l
Change engine oil
1)
l
Change engine oil filter
1)
l
Check, clean air filter
1)
l
Change air filter element
1)
l
Change fuel filter
1)
l
Drain water
(Fuel tank)
l
Check cool air/combustion
air intake
1)
l
Check exciter oil level
l
Change exciter oil
l
Check hydraulic oil level
l
Change hydraulic oil
Àl
Change return filter
element
Àl
Change ventilation filter
Àl
Clean suction filter
Àl
Check rubber buffer
l
Retightened screw
connections
l
Check scrapers
l
Clean the water sprayer
l
Check, adjust the valve
clearance
1)
l
1)
Observe the engine manual
À ð first time
32
5.1 General notes
Careful maintenance:
ð increased service life
ð increased function
ð reduced downtimes
ð increased reliability
ð reduced repair costs
–
Observe the safety regulations!
–
Maintenance works should only be carried out when the
engine is shut off.
–
The engine and machine should be cleaned thorougly
before carrying out maintenance work.
–
Park the machine on a flat surface and secure it against
rolling away and slipping.
–
Ensure that operating materials and replaced parts are
disposed of safely and in an environmentally - friendly
way.
–
Before commencing work on any electrical equipment,
disconnect the battery and cover it with insulating
materials.
–
Do not confuse „PLUS“ and „MINUS“ poles on the
battery.
–
It is essential that short-circuits be prevented in cables
carrying current.
–
Burn-out lightbulbs in indicator lamps should be
replaced immediately.
–
When cleaning the machine with a high-pressure water
jet, do not spray the electrical components directly.
–
After washing the components, blow-dry them with
compressed air in order to prevent surface leakage
current and corrosion.
–
When carrying out welding work on the engine or
machine, earth the welding instrument as close as
possible to the welding point and disconnect the battery.
6. Maintenance
To Next Page
Loading...
