3.4.2 Switching off the engine
–
Adjust engine speed control lever (1) to idle position.
–
Press motor stop button (3), until the motor stops running.
–
Release the stop button (stop button must return to its initial
position).
3.5 Operation
–
The vibration plate can be operated as soon as the engine
reacts to brief acceleration.
–
Move engine speed control lever to full load.
–
The vibration plate is steered by moving the towbar to the
side. The towbar can also be moved over to the other side
when working in confined areas.
–
The vibration plate can only be stopped by moving the engine
speed control lever to the idle position.
Attention
Operate vibration plate only at full throttle and during brief
rest periods, always move vibration plate to idle speed
otherwise the centrifugal clutch will slip and be damaged!
min
max
1
B1799302
3
2
B1799303
3. Operation
26
To Next Page
Loading...
Need help?
General
