5.2 Maintenance schedule (Honda = l / Hatz = s)
Intervals
daily 20 h 50 h 100 h 250 h 500 h
as
required
Works
Clean machine
ls
Check engine oil level
1)
ls
Change engine oil
1)
À<
ls
Clean engine oil filter
1)
<
s
Check air filter
1)
ls
Change air filter element
1)
sls
Change fuel filter
1)
s
Check, adj. the valve clearance
1)
À<
ls
Exciter: Check oil level
ls
Exciter: Change oil
2)
À<
ls
Check rubber buffer
ls
Check V-belt
ls
Retightened screw connections
ls
À< è first time
1)
Observe the engine manual
2)
or annually
5.1 General notes
Careful maintenance:
ð increased service life
ð increased function
ð reduced downtimes
ð increased reliability
ð reduced repair costs
–
Observe the safety regulations!
–
Maintenance works should only be carried out when the
engine is shut off.
–
The engine and machine should be cleaned thorougly
before carrying out maintenance work.
–
Park the machine on a flat surface and secure it against
rolling away and slipping.
–
Ensure that operating materials and replaced parts are
disposed of safely and in an environmentally - friendly
way.
–
It is essential that short-circuits be prevented in cables
carrying current.
–
When cleaning the machine with a high-pressure water
jet, do not spray the electrical components directly.
–
After washing the components, blow-dry them with
compressed air in order to prevent surface leakage
current and corrosion.
5. Maintenance
28
To Next Page
Loading...
Need help?
General
