EasyManua.ls Logo

Ammann APR 5920 - User Manual

Ammann APR 5920
160 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Ori gi nal be triebs an lei tung (DE)
Trans la ti on of the ori gi nal
Ope ra ting in struc tions (EN)
Tra duc ti on du Mo de d‘emploi
ori gi nal (FR)
Tra duc ción del Instruc cio nes
de ser vi cio ori gi nal (ES)
Book ID: 2-00002022ML
APR 4920
Serial Nr. 11003052-
APR 5920
Serial Nr. 10000001-
Hatz 1B40

Table of Contents

Questions and Answers

  • S
    Steven LiAug 9, 2025
    What to do if my Ammann Power Tool engine stops by itself?
    • R
      rodrigueznicholasAug 9, 2025
      If the engine of your Ammann Power Tool stops during regular operation, it might be due to an interrupted fuel supply, a dry tank, a blocked fuel filter, or a defective feed pump. Other potential causes include lost oil pressure or mechanical defects. Try adding fuel, renewing the fuel filter, checking the engine oil level, or having the feed pump function checked. If these steps don't resolve the issue, contact an Ammann service station.
  • G
    Gary CobbAug 16, 2025
    How to start an Ammann Power Tool if the engine won't start?
    • L
      Lori JosephAug 16, 2025
      If your Ammann Power Tool engine isn't starting, it could be due to several reasons: no fuel, a dry tank, a blocked fuel filter, a defective feed pump, lost oil pressure, or low compression. First, set the lever to the "START" position and add fuel. If that doesn't work, renew the fuel filter and check the engine oil level. Have the feed pump function checked. If the problem persists, contact an Ammann service station.
  • R
    Raymond GalvanAug 25, 2025
    What to do if Ammann APR 5920 Power Tool engine runs but machine doesn't move?
    • C
      Cindy BerryAug 25, 2025
      If your Ammann Power Tool isn't moving forward even when the engine is running, it could be due to insufficient V-belt tension, a broken V-belt, worn centrifugal clutch lining, too much oil in the exciter, or a fault in the hydraulic system. Try re-tensioning or replacing the V-belt, and replacing the linings and springs. Also, check the exciter oil level. If the issue continues, contact an Ammann service station.
  • E
    elizabeth54Aug 31, 2025
    Why is the performance of my Ammann APR 5920 Power Tool engine reduced?
    • P
      pearsontannerSep 1, 2025
      Reduced engine performance in your Ammann Power Tool can stem from an obstructed fuel supply (dry tank, blocked fuel filter), inadequate tank venting, leaks at pipe unions, a blocked air cleaner, incorrect valve clearance, too much oil in the engine or exciter, or a fault in the hydraulic system. Try adding fuel, renewing the fuel filter, ensuring adequate tank venting, checking threaded pipe unions, and removing dirt from the air cleaner. Also, adjust the valve clearance, drain engine oil to the upper mark on the dipstick, and check the exciter oil level. If problems persist, contact an Ammann service station.

Ammann APR 5920 Specifications

General IconGeneral
BrandAmmann
ModelAPR 5920
CategoryPower Tool
LanguageEnglish

Related product manuals