5.7.6 Exciter: Oil level / Oil change
Important
Change the oil when its warm.
–
Unscrew oil measuring plug (1) and oil drain plug (2).
Attention
–
Collect oil which flows out and dispose of oil without
harm to the environment.
–
Take care when draining hot oil: risk of scalding.
–
Check seals.
After the old oil has been drained:
–
Screw in oil drain plug (2).
–
Pour in fresh oil; oil quantity and quality, see lubrication
schedule.
–
If the oil level is correct, the oil film will extend up to the middle
of the marking when oil measuring plug (1) is screwed in.
–
Screw in oil measuring plug (1).
5. Maintenance
33
To Next Page
Loading...
Need help?
General
