Ammann AVP 1240 H User Manual

AVP 1240 H AVP 1250 AVP 1850 H AVP 1850 1B20
4. Speed
Speed max. 20 m/min
5. Vibration
Vibration force 12 kN 18 kN
Vibration frequency 98 Hz 85 Hz
6. Working surface
Working surface 0.14 m² 0.18 m² 0.20 m²
7. Spec. surface pressure
Spec. surface pressure 8.6 N/cm² 7.2 N/cm² 9.0 N/cm²
8. Optional equipment
Water tank 10 l
Water tank 5 l
Undercarriage
Vibration damped towbar
X
—
X
X
X
—
X
X
X
—
X
X
—
X
X
X
9. Noise and Vibration data
The following listed noise and vibration data according to the EC machine directive in the version (91/368/EEC) was determined
at the rated speed of the drive motor with vibration with the machine placed on a resilient base.
Values can deviate in normal use depending on the conditions prevailing at the place of use.
9.1 Noise data
The noise emission specified in appendix 1, subclause 1.7.4.f of the EC machine directive for:
the sound pressure level at the
operator place is L
PA
91 dB 93 dB 94 dB
Measured sound power level L
WA,m
103 dB 105 dB 106 dB
Guaranted sound power level L
WA,g
108 dB
The noise levels were measured according to ISO 3744 for the sound power level (L
WA
) and ISO 6081 for the sound pressure level
(L
PA
) at the operator workplace.
9.2 Vibration data (basic unit / vibration damped towbar)
Hand-arm vibration values according to appendix 1, sub-clause 3.6.3.a of the EC machine directive:
The weighted effective value of
acceleration, determined according
to ISO 8662, part 1, is
5.3 / 1.2 m/s² 5.8 / 2.4 m/s²
*Since the permissible noise rating level of 89 dB(A) can be exceeded with this machine, the operator must wear suitable
hearing protection.
2. Technical Data
23

Ammann AVP 1240 H Specifications

General

Brand	Ammann
Model	AVP 1240 H
Category	Power Tool
Language	English