Ampeg B2RE - User Manual

User’s Guide
for the
B2RE
Bass Amplifier
Made in the U.S.A. by

Ampeg B2RE Specifications

General

Preamp	Solid-State
Power Amp	Solid-State
Effects Loop	Yes
Type	Bass Amplifier
Power Output	450W @ 4 ohms
EQ	3-band EQ
Inputs	1 x 1/4" (Instrument)
Outputs	1 x XLR (balanced line out)
Speaker Outputs	2 x 1/4"
Dimensions	19 x 3.5 x 11 inches

Summary

Features

Front Panel Controls and Their Use

Input and Gain Controls

Adjusts the signal input level, attenuation, and peak indication.

Tone Shaping Controls

Controls for Bass, Ultra Mid, and Treble frequencies.

Master and Limiter Controls

Sets overall output level and engages the limiter function.

Equalization and Power Controls

Activates the graphic EQ and indicates power status.

The Rear Panel

Speaker Outputs

Connects the amplifier to speaker cabinets using Speakon or 1/4" jacks.

Input and Output Connections

Includes Power Amp In, Preamp Out, Effects Loop, and Balanced Output.

Power and Protection Features

Details AC Line In, Fuse, and cooling fan.

Some Suggested Settings

Rack Mounting

A Word About Speakon Connectors

Troubleshooting

Technical Specifications

System Block Diagram