Need help?Do you have a question about the Ampeg Micro-VR and is the answer not in the manual?
Power Output| output power rating at 8 Ω | 150 Watts RMS |
|---|---|
| output power rating at 4 Ω | 200 Watts RMS |
Signal and Gain| signal to noise ratio | 72 dB |
|---|---|
| maximum gain | 62 dB |
Tone Controls| bass control | +14/–12 dB @ 40 Hz |
|---|---|
| midrange control | +5/–13 dB @ 500 Hz |
| treble control | +19/–25 dB @ 8 kHz |
Power Requirements| power requirement for 100–120 VAC | 150 W |
|---|---|
| power requirement for 220–240 VAC | 150 W |
| frequency | 50–60 Hz |
Weight and Dimensions| size (H x W x D) in inches | 7.5 in x 12 in x 10 in |
|---|---|
| size (H x W x D) in millimeters | 190 mm x 305 mm x 254 mm |
| weight in pounds | 9.9 lb |
| weight in kilograms | 4.5 kg |
Covers the Input jack, -15 dB Pad, and Peak LED for signal management.
Details on Gain, Bass, Midrange, and Treble controls for sound character.
Explanation of Volume control, Limiter switch, and its indicator LED.
Covers Audio In, Headphones output, and the Power switch.
Information on the IEC power connector and voltage selector switch.
Guidance on ventilation and connecting speaker cabinets to the outputs.
Description of the Effects Loop send/return and the balanced XLR line output.
To Next Page
