Need help?Do you have a question about the Ampeg SVT-3 PRO and is the answer not in the manual?
Power| output power rating at 4 ohm load | 450 Watts RMS |
|---|---|
| output power rating at 8 ohm load | 275 Watts RMS |
| power requirements domestic | 120VAC, 60Hz |
| power requirements export | 230VAC, 50/60Hz |
| power requirements Japan | 100V 50/60Hz |
Tone Control| bass control range | ±12dB @ 50Hz |
|---|---|
| midrange control range | ±15dB @ selected by Frequency control |
| treble control range | +14dB/-19dB @ 5kHz |
Graphic Equalizer| graphic EQ level | ±10dB |
|---|---|
| graphic EQ range 33Hz | ±15dB |
| graphic EQ range 80Hz | ±8dB |
| graphic EQ range 150Hz | ±8dB |
| graphic EQ range 300Hz | ±8dB |
| graphic EQ range 600Hz | ±8dB |
| graphic EQ range 900Hz | ±8dB |
| graphic EQ range 2kHz | ±8dB |
| graphic EQ range 5kHz | ±9dB |
| graphic EQ range 8kHz | ±10dB |
Switches| bright switch | +6dB @2kHz |
|---|---|
| ultra high switch | +6dB @ 5kHz |
| ultra low switch | +2.5dB @ 50Hz -12dB @ 560Hz +1.5dB @ 5kHz |
Physical Characteristics| dimensions width | 19/17.4” |
|---|---|
| dimensions height | 4” (with feet) |
| dimensions depth | 15.5” |
To Next Page
