Need help?Do you have a question about the Ampeg BA-112 and is the answer not in the manual?
General| Power Output | 50 watts |
|---|---|
| Outputs | 1 x 1/4" (headphones) |
| Preamp | Solid State |
| Speaker Size | 12 inches |
| Tone Controls | 3-band EQ (Bass, Mid, Treble) |
| Inputs | 1 x 1/4" |
| Type | Solid State |
| Speaker | 1 x 12" |
Read, follow, heed, and keep all instructions and warnings for safe operation.
Follow rules to prevent amplifier damage, self-harm, and harm to others.
Connect passive bass guitars without active electronics or hot pickups.
Connect active basses or basses with hot pickups to this padded input.
Adjust output level; built-in limiter keeps output clean at full power.
Five-position switch to vary amplifier tone, use with EQ controls.
Controls to adjust high, mid, and low frequencies, used with Style control.
Connect CD player or tape deck line level output for mixed mono signal.
Post-EQ unbalanced line level signal for external connection.
Connect headphones for private practice; disconnects internal speaker.
Indicates power status and controls amplifier on/off.
To Next Page