8
MICRO-VR Bass Guitar Amplifier
Technical Specications
Output Power Rating 150 Watts RMS @ 8 Ω, 5% THD
200 Watts RMS @ 4 Ω, 5% THD
Signal to Noise Ratio 72 dB (20 Hz–20 kHz, unweighted)
Maximum Gain 62 dB, tone controls centered
Tone Controls Bass: +14/–12 dB @ 40 Hz
Midrange: +5/–13 dB @ 500 Hz
Treble: +19/–25 dB @ 8 kHz
Power Requirements 100–120 VAC, 50–60 Hz, 150 W
220–240 VAC, 50–60 Hz, 150 W
Size (H x W x D) 7.5 in/190 mm (with feet) x 12 in/305 mm
x 10 in/254 mm
Weight 9.9 lb/4.5 kg
The MICRO-VR is covered with a durable, fabric-backed vinyl material. Clean with a dry, lint-free cloth.
Never spray
cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
Warranty and Support
Visit WWW.AMPEG.COM to���
(1) ...identify WARRANTY coverage provided in your local market� Please keep your
sales receipt in a safe place.
(2) ...REGISTER your product�
(3) ...CONTACT Technical Support, or call 818-575-3600.
© 2019 Yamaha Guitar Group, Inc. All rights reserved.
Ampeg, the Ampeg logo, and SVT are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the U.S.
and/or other jurisdictions.
www.ampeg.com
Yamaha Guitar Group, Inc.
26580 Agoura Road, Calabasas, CA 91302-1921 USA
Rev. A