EasyManuals Logo

Ampeg Heritage Series User Manual

Ampeg Heritage Series
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Heritage Bass Guitar Cabinets
SVT-410HLF / SVT-810E
6
INSIDE INSIDE
INSIDE INSIDE
WARNING: THIS SPEAKER IS CAPABLE OF PRODUCING
SOUND PRESSURE LEVELS (SPL) WHICH CAN CAUSE
HEARING IMPAIRMENTS OR LOSS. EAR PROTECTION
IS RECOMMENDED
IMPEDANCE:
4 OHMS
POWER:
500W RMS/1000 PEAK
INPUTS
PIN 1+ = POS(+)
PIN 1- = NEG(-)
-db
LEVEL CONTROL
4
5
6
7
8
8
9
10
11
12
16
0
1
2
3
WARNING: THIS SPEAKER IS CAPABLE OF PRODUCING
SOUND PRESSURE LEVELS (SPL) WHICH CAN CAUSE
HEARING IMPAIRMENTS OR LOSS. EAR PROTECTION
IS RECOMMENDED
IMPEDANCE:
4 OHMS
POWER:
500W RMS/1000 PEAK
INPUTS
PIN 1+ = POS(+)
PIN 1- = NEG(-)
-db
LEVEL CONTROL
4
5
6
7
8
8
9
10
11
12
16
0
1
2
3
WARNING: THIS SPEAKER IS CAPABLE OF PRODUCING
SOUND PRESSURE LEVELS (SPL) WHICH CAN CAUSE
HEARING IMPAIRMENTS OR LOSS. EAR PROTECTION
IS RECOMMENDED
IMPEDANCE:
4 OHMS
POWER:
500W RMS/1000 PEAK
INPUTS
PIN 1+ = POS(+)
PIN 1- = NEG(-)
-db
LEVEL CONTROL
4
5
6
7
8
8
9
10
11
12
16
0
1
2
3
WARNING: THIS SPEAKER IS CAPABLE OF PRODUCING
SOUND PRESSURE LEVELS (SPL) WHICH CAN CAUSE
HEARING IMPAIRMENTS OR LOSS. EAR PROTECTION
IS RECOMMENDED
IMPEDANCE:
4 OHMS
POWER:
500W RMS/1000 PEAK
INPUTS
PIN 1+ = POS(+)
PIN 1- = NEG(-)
-db
LEVEL CONTROL
4
5
6
7
8
8
9
10
11
12
16
0
1
2
3
1
2
2
Example 2 above is not as common, but is great for daisy-chaining multiple cabinets. You
may connect a speaker cable with 1/4" or Speakon ends from one speaker output of the
amplier to the speaker input of the Ampeg Heritage SVT-410HLF cabinet. An additional
cabinet may be connected by attaching another speaker cable from an open jack (thru) to
the input jack of the next cabinet. Multiple cabinets may be daisy-chained this way.
WARNING: Always use good quality (non-shielded) speaker cables. Never use
(shielded) instrument cables to connect speakers to an amplier. Also, do not use both
cable routes listed in example 2 above. Use one route or the other, but never both
simultaneously!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ampeg Heritage Series and is the answer not in the manual?

Ampeg Heritage Series Specifications

General IconGeneral
Usable Low Frequency (-10dB)40Hz
CornersMetal
Input Connectors2 x 1/4" jacks
SeriesHeritage
CategoryEnclosure
CoveringTolex
HandleSide Handles

Related product manuals