www.ampereelectric.co.uk
Assembly
Your e-bike comes 85% assembled. To complete the assembly the handlebars, front wheel, pedals, saddle
and seat post will need to be attached. To do this, instructions with diagrams are set out in this section.
If you are having difficulty assembling the e-bike, please call your retailer for assistance. Further help is
available on our website where we publish FAQs or call our customer service team on 07877950433.
Please note – the pictures may vary from the actual product however; the process of assembly is the same.
Assembling the Stem handlebars
1. Make sure the handlebar stem is facing forwards, towards the front wheel.
2. Unscrew the 4 bolts on the stem using a 4mm Allen Key.
To Next Page
Loading...
