www.ampereelectric.co.uk
Charging the battery
The e-bike is supplied with a removable, rechargeable lithium-ion battery. Only use the charger provided
or an official charger supplied by Ampere.
The charging port is located on the top right-hand side of the battery as it sits on the frame, next to the
keyhole. See picture below.
Fully charge the battery before using the e-bike for the first time.
In order to prolong the life of the battery, we recommend that the battery is charged as often as
possible.
How to charge the battery
1. Plug the charger into a socket with the power switch turned off, then plug the opposite end into the
battery charging port. Once connected correctly, turn the socket on and the light on the charger
should appear red.
2. The light will turn green once the battery is fully charged.
Charger light Red – battery is charging
Charger light Green – charging is complete
3. Do not switch the e-bike on when charging.
4. Remember to cover the charge port after charging.
5. In the unlikely event that the battery overheats or emits strange odours, please contact your dealer
as soon as possible.
To Next Page
Loading...
