www.ampereelectric.co.uk
Regular checks
Please check that: -
the quick release clamping lever on the seat post is secure,
the brakes are working correctly,
the tyre pressure is correct – If the tyres need pumping up, attach a bike pump to the valve (shown
in the photo below) and inflate to 40 – 50 PSI.
Safe Riding
Before each ride, check that all bolts are tight, the battery has sufficient charge for your planned
journey, the charging port is covered, your tyres are correctly inflated, both your brakes are working and
your front and rear lights are working correctly.
To Next Page
Loading...
