8
D-0115687-C (OM008) – 170 Operating Manual
Use familiarization?: Press YES to employ a familiarisation routine at
the start of an automatic test sequence on
either ear (see Section 4.5.2)
Store on 2 of 3?: Press YES to activate automatic storage of the
threshold level at which the patient makes 2 out
of 3 responses in a manual test
Pulse in Manual?: Press the YES key to output a pulse tone in
manual mode
2 of 3 in auto?: Press YES to activate automatic storage of the
threshold level at which the patient makes 2 out
of 3 responses in an automatic test (rather than
the default 3 out of 5)
Default level: Use the SIGNAL keys to adjust the default
tone presentation level in manual mode
Select printer: Use the MENU SELECT to select either the
Able AP1300 or the Sanibel MPT-II printer
3.4.3 Description of Function of Other Keys
PRINT Press this key to print the current threshold
levels; then press YES to confirm the print
operation or NO to cancel
RESET Press this key during an automatic test to
cancel the test and return to the default display;
any thresholds already found will be retained
+20dB This enables tone levels to be presented with
up to 20dB higher output in manual test mode;
press the key and then use SIGNAL to
access the extra 20dB in 5dB steps; an
indicator above the key is used to show that the
function is active
To Next Page
Loading...
