23
D-0115687-C (OM008) – 170 Operating Manual
8.3 Mains adapter maintenance
Before use check the mains AC adapter for signs of wear and/or damage.
If you find any replace the adapter immediately by contacting Amplivox or
your Amplivox distributor. Refer to Section 12 for approved part numbers.
DO NOT USE ANY OTHER TYPE OF MAINS ADAPTER
WITH THIS INSTRUMENT. See Section 2.3.
9 Instrument Storage and Transportation
This instrument can be stored or transported within the following
environmental parameters:
Temperature: -20
o
C to +70
o
C
Humidity: 10% to 90% (non-condensing)
Atmospheric Pressure: 500 hPa to 1060 hPa
10 Calibration and Repair of the Instrument
Amplivox recommends that this audiometer should be calibrated on an
annual basis. Please contact Amplivox or the designated distributor for
details of calibration services. Refer to ISO 8253-1 for additional guidance.
The instrument should be returned to the
manufacturer for service & repair. There are no user-
serviceable parts within it.
When packing the instrument for shipping, please use the original
shipping carton and packing materials. Please also ensure that the
headset leads are not wrapped around the headband of the headset.
To Next Page
Loading...
