3.4.2 MENU
Pressing and holding MENU accesses the following options. Use the
MENU SELECT keys to step through the available options and then the
NO, YES or SIGNAL keys to select an action or modify a setting.
Release of the MENU key then initiates the action or saves the modified
setting and returns to the default display.
Menu Option Description
Switch off?: As described in Section 3.1
Print audiogram?: Press YES and release MENU; then press YES
to confirm the print operation or NO to cancel
Clear test?: Press YES and release MENU to clear the
displayed test results; stored test results are
not affected
Save audiogram to 1: Use the SIGNAL keys to select the
required storage location and press the YES
key to save the audiogram; then release MENU
Load audiogram no. 1: Use the SIGNAL keys to select the
required storage location and press the YES
key to load the audiogram; then release MENU
Contrast: Adjust contrast using the SIGNAL keys
Bone masking: Use the SIGNAL keys to select the AC
headset or the optional masking earpiece as
the means of masking
Select phones: This option is only available if a secondary
headphone is enabled; use the SIGNAL
keys to select the required headphone type
FF equiv. speech?: This option is only available if either DD45 or
TDH39 is the selected headphone; if activated,
free-field equivalent levels will output to the
headphone in speech mode (see Appendix 1)
To Next Page
Loading...
