Upon receipt of the printer it must be initially charged for a minimum of 15
hours prior to use.
2.6 Data transfer to a computer
Please refer to Appendix 4 for important information
regarding the connection of non-medical electrical
equipment to medical electrical equipment
The audiometer can be upgraded with an option to allow connection to a
computer with the NOAH application for the transfer of air conduction,
bone conduction, speech and ULL test results (see Section 3.9). You must
use the designated cable which is supplied with this option.
2.7 Line in/out connection (audio)
Please refer to Appendix 4 for important information
regarding the connection of non-medical electrical
equipment to medical electrical equipment
The Amplivox Model 260 has audio line in/out connections for CD or tape
player input (e.g. for recorded speech testing) and amplifier output.
Important Note:
Line out connections are switched on only when FREFIELD is selected.
The following connections apply to both LINE IN and LINE OUT.
For more information on live and recorded speech refer to Appendix 1.
3 Using the Audiometer
3.1 Switching the audiometer on and off
Press the ON/OFF key located at the left of the front panel. No warm-up
time is required. The display will briefly show the model and the type of
headphone currently in use.
To Next Page
Loading...
Need help?
General
