Amprobe ACD-14 FX - Specifications; General Specifications

14
Specifications
General Specifications
Display: 3-3/4 digits 4000 counts, dual LCD displays
Update Rate: 3 per second nominal
Polarity: Automatic
Low Battery Indication: Below approx. 2.4V
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Relative Humidity: Maximum relative humidity 80% for temperatures up to 31°C
(88° F) decreasing linearly to 50% relative humidity at 40°C (104° F)
Altitude: Operating below 2000m (6,562 ft)
Storage Temperature: -20°C to 60°C (-4°F to 140°F), < 80% R.H. (with battery removed)
Temperature Coefficient: nominal 0.15 x (specified accuracy)/0°C - 18°C or 28°C - 40°C
(°F @ 32°F - 64°F or 82°F - 104°F, or otherwise specified
Sensing: Average sensing for ACD-14 FX; True RMS for ACD-14 TRMS FX
Power Supply: Two 3V alkaline button batteries (ANSI/NEDA-5004LC, IEC-CR2032).
Battery Life: 95 hours approx. (in DCV mode)
Power Consumption: 2.5 mA typical for ACD-14 FX;
2.9mA typical for ACD-14 TRMS FX
Low Battery Indication: Below approx. 2.4V (battery symbol appears in upper right)
Auto Power Off: After being idle for 30 minutes
APO Consumption:
ACD-14 FX: 0.8µA typical except 25µA typical for temperature function
ACD-14 TRMS FX: 10µA typical except 25µA typical for temperature function
Dimension: L 190mm X W 63mm X H 32mm (L 7.48” X W 2.48” X H 1.25”)
Weight: 204 g (0.450 Lb) approx.
Jaw opening & Conductor diameter: 26mm (1.02”) max
Safety: Category III 600 Volts AC & DC
CE Approved
UL Listed
Transient protection: 6.5kV (1.2/50µs surge) for all models
Pollution degree: 2
Overload Protections:
ACA Clamp-on jaws: AC 400A RMS continuous
“+” & “COM” terminals (all functions): 600VDC/VAC RMS