Need help?Do you have a question about the Amprobe DMIII and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Display | LCD |
| Max Voltage | 600 V |
| Max Current | 10 A |
| Resistance Measurement | Yes |
| Temperature Measurement | No |
| Diode Test | Yes |
| Continuity Test | Yes |
| Battery Type | 9V |
| Display Digits | 3.5 |
| Voltage Range (AC) | 200 mV to 600 V |
| Voltage Range (DC) | 200 mV to 600 V |
Recommendations for safe operation and handling of the instrument during measurements.
Details on performing continuity tests using 200mA current.
Comprehensive guide to performing insulation resistance tests.
Instructions for determining the phase sequence of a three-phase system.
Procedures for measuring ground resistance and resistivity.
Configuration settings for the power quality analyzer.
Configuration settings for data recording parameters.
Overview of the different operating modes within the Power Quality function.
Displays voltage, current, power, and energy parameters.
Guide for connecting and using the instrument in single-phase systems.
Guide for connecting and using the instrument in 3-phase 4-wire systems.
Guide for connecting and using the instrument in 3-phase 3-wire systems.
Practical procedures for testing continuity of protective conductors.
Procedure to check circuit separation in various safety systems.
Procedure for measuring floor insulation resistance in medical rooms.
How the instrument records voltage anomalies like sags and surges.
Theoretical explanation of voltage and current harmonics.
To Next Page
