Amprobe DMIII - Standards; General; Safety Test; Power Quality

AMPROBE
DMIII MULTITEST
EN-78
14.2. STANDARDS
14.2.1. General
Safety EN 61010-1 + A2 (1997)
Protection classification Class 2 - Double Insulation
Pollution degree 2
Degree of Protection: IP50
Over-Voltage Category CAT II 600V~ / 350V~ (phase –earth)
CAT III 600V~ / 300V~ (phase –earth)
Usage: Indoor; max height 2000m
EMC EN61326-1 (1997) + A1 (1998)
The Instrument comply with European Guidelines for CE mark
14.2.2. Safety Test
LOW (200mA): IEC 61557-4
INSULATION TEST IEC 61557-2
PHASE SEQUENCE: IEC 61557-7
GROUND TEST: IEC 61557-5
14.2.3. POWER QUALITY
Voltage Sag and Surge EN50160
Alternating Current Static Watt-hour meters for Active Energy EN61036 (CLASS 2)
Alternating Current Static VAR-hour meters for Reactive Energy IEC1268 (CLASS 3)