1
Inductance, Capacitance, Resistance Meter
Contents
Symbols .............................................................................................................. 1
Warnings and Precautions ................................................................................ 1
Overload Indication .......................................................................................... 2
Preparation for Use – Unpacking ..................................................................... 2
Measuring Procedures ...................................................................................... 2
Specifications ..................................................................................................... 4
Troubleshooting/Maintenance ......................................................................... 6
Repair ................................................................................................................. 7
Symbols
Warnings and Precautions
• Do not exceed the maximum overload limits per function (see specifications)
nor the limits marked on the instrument itself.
• Exercise extreme caution when: measuring voltage >20V .
• Inspect DMM, test leads and accessories before every use. Do not use any
damaged part.
• Never ground yourself when taking measurements. Do not touch exposed
circuit elements or probe tips.
• Do not operate instrument in an explosive atmosphere.
• Clean instrument with mild detergent only.
Battery
Refer to the manual
Double insulated
Audible tone
Fuse
Complies with EU
directives
Conforms to relevant Australian standards
To Next Page
Loading...
