Need help?Do you have a question about the Amprobe PM55A and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Model | PM55A |
| Manufacturer | Amprobe |
| Display | LCD |
| Display Digits | 6000 |
| Continuity | Yes |
| Diode Test | Yes |
| Auto Ranging | Yes |
| Data Hold | Yes |
| Safety Rating | CAT III 600V |
| Auto Power Off | Yes |
| AC Current Range | 0-10 A |
| DC Current Range | 0-10 A |
| Temperature Range | -40°C to 1000°C |
| Weight | 0.55 lbs |
Identifies the LCD display, rotary switch, SELECT button, and test leads.
Overview of the PM55A meter's features and portability.
Essential safety guidelines, certifications, and precautions for use.
Explains common symbols found in the documentation.
Instructions for powering the meter on and off.
General advice on using test leads for measurements.
How to cycle through measurement functions using the SELECT button.
Automatic selection of Vdc, Vac, or resistance.
Procedures for continuity testing and non-contact voltage detection.
How to measure voltage and resistance.
How to measure frequency and capacitance.
Using the 600 Ω range and measuring microamps.
Guidelines for cleaning and general care of the meter.
Steps to resolve common issues if the instrument fails.
Procedure for safely replacing the internal battery.
Details of the product warranty and limitations.
Information on how to obtain repair or calibration services.
Technical specifications like temperature, humidity, and power.
Lists safety and EMC certifications.
Ranges, accuracy, and input impedance for DC voltage.
Ranges, accuracy, and input impedance for AC voltage.
Ranges and accuracy for capacitance and resistance.
Ranges and accuracy for frequency measurements.
Ranges and indications for current and VolTect™.
Specifications for continuity and diode tests.
To Next Page
