Need help?Do you have a question about the Amprobe CO2-100 and is the answer not in the manual?
General| CO2 Accuracy | ±30 ppm ±5% of reading |
|---|---|
| Response Time | < 30 seconds |
| Operating Humidity | 0 to 95% RH (non-condensing) |
| Battery Type | AA |
| Dimensions | 205 x 70 x 56 mm |
| Weight | 200 g |
| Temperature Range | -10 to 60 °C |
| Temperature Accuracy | ±0.6 °C |
| Humidity Range | 0 to 95% RH (non-condensing) |
| Humidity Accuracy | ±3% RH (10 to 90% RH) |
| Resolution | 1 ppm (CO2), 0.1% RH |
| Operating Temperature | -10°C to 60°C (14°F to 140°F) |
| Storage Temperature | -20 to 60 °C |
| Power Supply | 4 AA batteries |
| Battery Life | 24 hours (alkaline batteries) |
Detailed descriptions of all indicators and readings shown on the LCD.
Important warnings and precautions for safe and accurate operation.
Procedure for setting the CO2 alarm threshold value.
Procedure for selecting the temperature unit (°C or °F).
Steps for calibrating the CO2 sensor in an outdoor environment.
Procedures for calibrating the humidity sensor using salt bottles.
Instructions for replacing the meter's batteries or connecting an adapter.
Troubleshooting slow response times and understanding error code meanings.
To Next Page
