Need help?Do you have a question about the Amprobe CR50A and is the answer not in the manual?
General| Brand | Amprobe |
|---|---|
| Model | CR50A |
| Category | Measuring Instruments |
| Language | English |
Process for returning products for warranty or non-warranty repair or calibration.
Procedures for obtaining warranty service and replacement for defective test tools.
Instructions for sending products for non-warranty repairs in the US and Canada.
Information on replacing non-warranty units through European distributors.
Details about Beha-Amprobe, division and trademark of Fluke Corp., with contact information.
The 3½ digit LCD, decimal point, function, and unit indicators.
The main selector dial for functions/ranges and controls for zeroing measurements.
Terminals for capacitance, resistance, diode, and continuity measurements.
Explains common symbols used on the instrument and in the manual.
Critical safety guidelines to prevent damage or injury during operation.
How the meter indicates measurements exceeding the selected range.
Lists items included in the package and initial setup steps.
Essential practices for connecting/disconnecting leads and handling capacitors.
Step-by-step guide for performing resistance measurements using the meter.
How to zero out test lead resistance on the 200 Ohm range.
How to test diodes and transistor junctions for forward and reverse bias.
Explains how readings indicate good, open, or shorted diodes.
Steps for checking electrical continuity between two points with audible indication.
Guide for measuring capacitance, including polarity and reading interpretation.
How to perform zero adjustment for capacitance measurements to account for test lead capacitance.
Description of safety features on the included test leads to prevent shock.
Details on the display, zero adjustment, overrange, battery, update rate, and environmental conditions.
Information on the meter's physical size and typical battery life.
Details on the meter's weight, included accessories, and agency compliance.
Accuracy, resolution, OL protection, and voltage for resistance ranges.
Accuracy and test frequencies for capacitance ranges.
Test current/voltage for diodes, continuity parameters, and optional accessories.
A systematic approach to identify and resolve operational problems with the meter.
Guidelines for safely cleaning the front panel and case of the multimeter.
Detailed instructions for replacing the battery and fuse, including safety warnings.
To Next Page
