Need help?Do you have a question about the Amprobe NCV-1020 and is the answer not in the manual?
General| Certification | KCC, CSA |
|---|---|
| Product color | Black, Red, White |
| LED indicators | Power |
| AC outlet types | Type A, Type B, Type H, Type I |
| AC voltage range | 50 - 1000 V |
| Built-in display | No |
| Power consumption | 80 mA |
| AC input frequency | 50 - 400 Hz |
| Operating principle | Contactless |
| Overvoltage category | CAT IV |
| Receptacle tester indication | Live/neutral reverse |
| International Protection (IP) code | IP65 |
| Operating temperature (T-T) | -10 - 40 °C |
| Operating relative humidity (H-H) | 80 - 85 % |
| Battery type | LR03 |
| Battery voltage | 21.5 V |
| Batteries included | Yes |
| Compatible battery sizes | AAA |
Weight and Dimensions| Depth | 156.2 mm |
|---|---|
| Width | 23.5 mm |
| Height | 27.5 mm |
| Weight | 58 g |
Details for returning Amprobe products for repair or calibration services, including required documentation.
Process for returning defective test tools for exchange within the warranty period through distributors or service centers.
Procedure for sending units for non-warranty repair or replacement in the United States and Canada.
Explanation of various safety, certification, and product symbols used in the manual.
Guidelines for users to be knowledgeable and trained on risks associated with voltage measurement.
Instructions for powering the tester on, changing voltage ranges, and turning it off.
Details on the automatic power off feature to conserve battery life for specific models.
Procedure for testing AC voltage in receptacles and wires using the tester.
How the tester indicates a low battery level and the need for replacement.
Step-by-step guide for removing and replacing the batteries in the tester.
Instructions for cleaning the tester using mild soap and water, avoiding solvents.
To Next Page
