Need help?Do you have a question about the Amprobe THWD-5 and is the answer not in the manual?
Describes how to turn the meter on and off, including auto sleep mode.
Explains how to activate and deactivate the LCD backlight for visibility.
Details switching between Celsius (°C) and Fahrenheit (°F) units.
Instructions on how to freeze the current measurement on the display.
How to switch and view different measurement types.
How to capture, view, and reset minimum/maximum values.
Procedure to disable the automatic power-off feature.
Troubleshooting steps for when the meter does not show any display.
Solutions for intermittent display issues.
Information on identifying and resolving calibration errors.
Describes how to turn the meter on and off, including auto sleep mode.
Explains how to activate and deactivate the LCD backlight for visibility.
Details switching between Celsius (°C) and Fahrenheit (°F) units.
Instructions on how to freeze the current measurement on the display.
How to switch and view different measurement types.
How to capture, view, and reset minimum/maximum values.
Procedure to disable the automatic power-off feature.
Troubleshooting steps for when the meter does not show any display.
Solutions for intermittent display issues.
Information on identifying and resolving calibration errors.
Measurement Range| RH measurement range | 0~100% |
|---|---|
| Temperature range | -10~60 °C (14 to 140 °F) |
| DP range | -73.4 to 59.9 °C (-100.0 to 139.8 °F) |
| WBT range | -13.4 to 59.9 °C (7.88 to 139.8 °F) |
Accuracy| RH accuracy | +/-3% from 10-90% (at calibration temperature); +/-5% for others |
|---|---|
| Temperature accuracy | +/-0.6°C (+/-1°F) |
Operating Environment| Storage temperature | -20°C to 60°C (-4°F to 140°F) |
|---|---|
| Operating temperature | 0°C to 50°C (32°F to 122°F) |
To Next Page
