Need help?Do you have a question about the Amprobe THWD-2 and is the answer not in the manual?
General| Brand | Amprobe |
|---|---|
| Model | THWD-2 |
| Category | Measuring Instruments |
| Language | English |
Locates the physical sensor for humidity and temperature measurements.
Describes the LCD dual display and analog scale for readings.
Function of the key used to turn the meter on or off.
Function to freeze/unfreeze readings and switch display modes.
Cycles through Humidity, Dew Point, and Wet Bulb temperature readings.
Selects MAX/MIN modes and switches temperature units (°C/°F).
Controls manual data memory storage and management.
Controls manual data memory reading and display.
Procedure for measuring humidity and obtaining stable readings.
Procedure for measuring temperature and switching units (°C/°F).
Procedure to display dew point temperature on the main display.
Procedure to display wet bulb temperature on the main display.
Procedure to enter recorder mode and start elapsed timer.
Procedures for clearing, storing, and reading manual memory data.
Procedure to configure the auto power off timer settings.
Instructions for cleaning the meter case with mild detergent.
Guidance on replacing the battery when the 'BT' symbol appears.
To Next Page
