Need help?Do you have a question about the Amprobe SM-10 and is the answer not in the manual?
General| Air Temperature Units | °C, °F |
|---|---|
| Data Hold | Yes |
| Max/Min Reading | Yes |
| Average/Current Reading | Yes |
| Power Source | 9V Battery |
| Air Velocity Range | 0.4 to 30 m/s |
| Air Velocity Units | m/s, km/h, ft/min, mph, knots |
| Resolution | 0.1 m/s |
| Accuracy Air Velocity | ±3% of reading ±0.2 m/s |
| Accuracy Air Temperature | ±1°C (±2°F) |
| Display | LCD |
| Resistance Range | 20MΩ |
| DC Current Range | 0 to 10A |
| AC Current Range | 0 to 10A |
Details required for warranty or non-warranty repair, including contact information and payment methods.
Procedure for returning defective units for exchange or repair under warranty across all countries.
Guidance for out-of-warranty repairs and replacements for units in the United States and Canada.
Information for European customers on replacing non-warranty units through distributors.
Explanation of symbols used in the manual and on the device.
List of items included in the shipping carton and instructions for checking for damage.
Overview of the sound level meter's design and compliance with industry standards.
Instructions on powering on the device and selecting response time and weighting.
How to use the MAX/MIN function to display maximum or minimum average values.
Description of the HOLD feature to freeze the current reading on the LCD.
Instructions for enabling and disabling the display backlight for low-light conditions.
Procedure for transferring recorded data from the SM-20 to a PC.
Step-by-step guide for calibrating the sound level meter using an acoustic calibrator.
Technical details including display, microphone, power, environment, and dimensions.
Audio-related specifications like dynamic range, resolution, frequency, and accuracy.
Instructions for basic maintenance and how to replace the device's battery.
To Next Page
