EasyManua.ls Logo

Amprobe LM-100 - Battery Replacement and Cleaning; Battery Replacement Procedure

Amprobe LM-100
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
instrument service personnel. The front panel and case can be cleaned with
a mild solution of detergent and water. Apply sparingly with a soft cloth and
allow to dry completely before using. Do not use aromatic hydrocarbons or
chlorinated solvents for cleaning.
Battery Replacement
Turn off the meter and slide out the battery cover. Replace the battery 1.
with a NEDA type 1604 or equivalent 9V alkaline battery. Replace the
cover.
Remove battery when the LM-100 / LM-120 is not used for extended 2.
period.
Battery Replacement
OPEN