EasyManua.ls Logo

Amprobe TR300 - User Manual

Amprobe TR300
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TR300
Temperature and
Relative Humidity
Data Logger
Users Manual
• Mode d’emploi
• Bedienungshandbuch
• Manual d’Uso
• Manual de uso
• Användarhandbok

Questions and Answers

  • M
    Melanie BakerAug 10, 2025
    What to do if my Amprobe Data Logger powers on but has no display?
    • B
      Brittany HarrisAug 10, 2025
      If your Amprobe Data Logger powers on but the display is blank or the meter isn't working, try these steps: * Ensure the DC power is properly connected. * Press and hold the "START/STOP" key for at least 0.1 seconds. * Inspect the batteries to confirm they're making good contact and the polarity is correct. * If the issue persists, replace the batteries.
  • B
    Barbara FordAug 21, 2025
    What to do if Amprobe TR300 show E32 IC read/write error?
    • M
      Monica FerrellAug 21, 2025
      If your Amprobe Data Logger shows an "E32: IC read/write error", return the meter for repair.
  • L
    Lindsey LarsonAug 29, 2025
    What to do if Amprobe TR300 display E33 circuit error?
    • J
      Jennifer Jones MDAug 29, 2025
      If your Amprobe Data Logger displays an "E33: Circuit error in measurement portion", return the meter for repair.

Summary

Introduction

Unpacking and Inspection

Details the standard package contents and initial inspection procedures for the data logger.

Device Operation

Powering the Unit On and Off

Instructions for powering the TR300 data logger on and off using the Start/Stop button.

Setting Mode Navigation

Guide to entering and navigating the device's setting menu for configuration.

Start Mode Configuration

How to set the recording start mode (Repeat, Key Start, Immediately, Schedule).

Setting Start Time

Procedure for setting the year, month, day, hour, minute, and second for scheduled start.

Configuring Sample Rate

Steps to set the interval between data recordings (sample rate).

Alarm Settings Configuration

How to configure high/low temperature and humidity alarm thresholds.

Setting Real Time Clock

Guide to setting the device's internal clock and date for accurate logging.

Temperature Unit Conversion

Instructions on how to switch between Fahrenheit (°F) and Celsius (°C).

Dew Point Measurement

How to activate and switch between dew point and humidity readings.

Instrument Connection to PC

Steps to connect the logger to a PC using the RS232 interface.

PC Interface and Software

RS232 PC Interface Capabilities

Details on using the RS232 cable and optional USB converter for data transfer.

Download Suite Software Installation

Guide for installing the data logging software on a PC.

Software Operation

Steps for using the Download Suite software to configure and download data.

Troubleshooting

Power and Display Issues

Solutions for when the meter does not power on or display correctly.

Error Codes Explained

Meanings and solutions for common error codes (E02, E03, E04, E11, E32, E33).

Specifications

Amprobe TR300 Specifications

General IconGeneral
BrandAmprobe
ModelTR300
CategoryData Loggers
LanguageEnglish

Related product manuals