short time without power supply, so it will be shorter than
normal recording.
8.1.11 Time Lapse
Time-lapse is usually for storage space saving. It is a
technique whereby the frequency at which film frames are
captured (the frame rate) is much lower than that used to
view the sequence. For example:
30fps = 30 images taken per second;
5s time-lapse = 1 image taken per 5 seconds.
8.1.12 White Balance
The default setting is AUTO. You can choose different
weather mode to fit different scenarios.
8.1.13 Video Contrast
It is for changing the video contrast.
8.1.14 Frequency of Light Source
The default setting is AUTO. If you are using this dash
cam in US, Canada or Japan, it would be 60Hz. Other
countries are 50Hz. When setup wrongly, you might see
stripe interference on the video image when playback on
the PC.
8.1.15 Video Sharpness
It is for changing the video sharpness.
- 18 -
To Next Page
Loading...
