8.1.16 Video Exposure
It is for changing the video exposure level.
8.1.17 Button Sound
The default setting is ON. You can turn on/off the system
button sound.
8.1.18 Date and Time Setup
You can change the date and time of the system.
8.1.19 Watermarking
You can choose whether or not to put date/time stamp,
machine logo stamp or plate number stamp on the video
clip as a watermark.
8.1.20 Auto LCD off Setting
The default setting is 3 MIN. With this function, the
camera’s LCD will light off after 3 minutes when recording.
You can also adjust this time to 30s or 60s, or turn it OFF.
8.1.21 Non-use Auto Power off setting
The default setting is 3 MIN. The camera’s LCD will light
off after 3 minutes when not recording.
8.1.22 Turn on Delay
The default setting is OFF. You can delay the start-up
every time the camera is turned on.
8.1.23 Power off Delay
- 19 -
To Next Page
Loading...
