Appropriate Hopper sensitivity level as 200 [100-300] has been adjusted from factory, however, if it is
necessary to trouble shoot a problem related with banknote presence, trained operator or service-provider
able to make slight adjustment of this level around default value. Please be note that any value over 200 may
lead to machine’s determination of a banknote presence on the hopper and machine may starts to operate.
7. Parameter
1. LOADING DEFAULT (only for trained professional)
Factory adjusted certain parameter (turned On/Off) and various settings as default settings during production.
During uses of MiB-9 machines in the field, operators or service-provider may change those parameters / settings
To Next Page
